Display Mode
Selection of Display 9000 Mode
The following is an explanation of the 9000 Selection Mode Display, which shows a voltage of 9000 volts, the frequency alternating between 70Hz and 120Hz every 5 minutes until therapy concludes. For first-time users or those who have never experienced therapy before, it is recommended to start with this mode to become familiar with the process. For individuals who have some experience with therapy, please use this mode for a few days before transitioning to a stronger setting when you feel more prepared. Connect the connector of pad into the high potential port. This mode allows electron flow current to deeply target the organ systems and body tissues at a voltage of 5000 volts. Additionally, the type of waveform (ratio) will change every 5 minutes between -50, -75, and -100.
Selection of Display 12000 Mode
The following is an explanation of the Display of Selection Mode 12000 which shows 12000 Volts, the frequency alternating between 90Hz and 120Hz every 5 minutes until therapy concludes. Electron flow with deep concentration up to every type of cells in the body with a voltage of 12000 Volts. Type of Wave (ratio) will change every 5 minutes between -50, -75 and -100.
Selection of Display 14000 Mode
The following is an explanation of the Display of Selection Mode 14000 which shows 14000 Volts, 120 Hz. Electron flow with deep concentration up to the nucleus of a cell and mitochondria with a voltage of 14000 Volts. Type of Wave (ratio) will change every 5 minutes between -50, -75 and -100.
Selection of Display -6000 Mode
The following is an explanation of the Display of Selection -6000 which shows -6000 Volts, the frequency alternating between 50Hz and 120Hz every 5 minutes until therapy concludes. For first timers and never used therapy, please use this Mode until you get used to using therapy. For those who have used therapy, please use this Mode for a few days and then switch to a stronger Mode when you are more ready. Electron flow with deep concentration up to the organ system and body tissues with a voltage of -6000 Volts. Type of Wave (ratio) will change every 5 minutes between -50, -75 and -100.
Selection of Display -8000 Mode
The following is an explanation of the Display of Selection Mode -8000 which shows -8000 Volts, the frequency alternating between 100Hz and 120Hz every 5 minutes until therapy concludes. Electron flow with deep concentration up to every type of cells in the body with a voltage of -8000 Volts. Type of Wave (ratio) will change every 5 minutes between -50, -75 and -100.
Selection of Display -10000 Mode
The following is an explanation of the Display of Selection Mode -10000 which shows -14000 Volts, the frequency alternating between 110Hz and 120Hz every 5 minutes until therapy concludes. Electron flow with deep concentration up to the nucleus of a cell and mitochondria with a voltage of -10000 Volts. Type of Wave (ratio) will change every 5 minutes between -50, -75 and -100.
Selection of Display Intelligent Mode For High Potential
The following is an explanation of the Intelligent Mode Display that shows the voltage and frequency change every 5 minutes in each cycle, and the cycle will repeat itself until the end of time. In one cycle, the Display Voltage and frequency shows (-) 9000 Volts with a frequency of 70 Hz, (-) 12000 Volts with a frequency of 90 Hz, and (-) 14000 Volts with a frequency of 120 Hz. Types of Wave (ratio) will change every 5 minutes between -50, -75, and -100. A person should get used to using other modes first for at least a month before using Intelligent Mode.
Selection of Display Intelligent Mode For Negative Potential
The following is an explanation of the Intelligent Mode Display that shows the voltage and frequency change every 5 minutes in each cycle, and the cycle will repeat itself until the end of time. In one cycle, the Display Voltage and frequency shows (-) 6000 Volts with a frequency of 50 Hz, (-) 8000 Volts with a frequency of 90 Hz, and (-) 10000 Volts with a frequency of 120 Hz. When the pad port is inserted into the negative potential jack, the voltage will automatically be in negative potential mode. Types of Wave (ratio) will change every 5 minutes between -50, -75, and -100. A person should get used to using another mode first for at least a month before using Intelligent Mode.
Selection of Display IF Potential Mode
The following is an explanation of the Display Selection Mode of IF that shows the Intermediate Frequency Wave Form. IF stands for Intermediate Frequency which uses 2800 Volts and 120 Hz. Doing 20 minutes of IF Therapy is equivalent to an hour of jogging or 2 hours of walking. This therapy is also called light wave energy therapy which is able to turn on the light if touched by the person undergoing the therapy holding the light bulb.
Selection of Display Intelligent Warm Moxibustion Mode
The following is an explanation of the Warm Moxibustion Display Mode for the Tourmaline FIR Mattress. There are 3 heat settings, namely low, middle and high. Warm Moxibution Mode cannot be used simultaneously with Electron Mode and IF Mode.